English 
Platelet Rich Fibrin (PRF) Dental Implant Surgery Box Set
$159.99
CE Approved MediTek PRF Dental Implant Surgery Box Set. Complete medical-grade stainless steel instrument kit for preparation and handling of platelet-rich fibrin (PRF) membranes, sticky bone, and ridge preservation grafts in dental implant and periodontal procedures
47 in stock
| Title | Qty | After Discount Price |
|---|---|---|
| Buy 2 Get 5% Discount | 2 | $151.99 |
| Buy 3 Get 8% Discount | 3 | $147.19 |
| Buy 4 Get 10% Discount | 4 + | $143.99 |
Platelet Rich Fibrin (PRF) Dental Implant Surgery Box Set
The MediTek PRF Dental Implant Surgery Box Set gives you every instrument needed to turn a patient’s own blood into PRF membranes and sticky bone grafts. It pairs a stainless steel PRF box with forceps, scissors, graft packers and trays, all stored in one sterilization cassette. Unlike many platelet-rich fibrin kits for sale that ship as loose parts, this dental PRF kit covers implant, periodontal and ridge preservation work in a single box.
What Is Included in This PRF Kit
Here is what each piece of PRF equipment in the set does during a PRF membrane graft procedure.
- PRF Box (1): Compresses fibrin clots into flat membranes of even thickness and collects the exudate in the lower tray.
- Goldman Fox Scissor, Curved (1): Separates the fibrin clot from the red cell layer and cuts membranes to size.
- Giraffe Tissue Forcep 1×2 (1): Long, slim forcep for placing PRF membranes into tunnels and tight soft tissue sites.
- Semken Tissue Forcep (1): Lifts clots out of tubes and handles membranes without tearing them.
- Graft Packers (2): Condense sticky bone and graft material into sockets, sinus sites and implant defects.
- Pad Carrier (1): Carries membrane pieces and graft material to the surgical site.
- Spoon (1): Scoops and moves particulate graft material.
- Mini Bone Tray (1): Flat work surface for trimming, folding and dicing membranes.
- Mini Bowl (1): Mixes diced PRF with bone graft particles to form sticky bone.
- Tube Rack, 12 Slots (1): Holds blood collection tubes upright before and after the centrifuge.
- Instrument Cassette Tray (1): Keeps the full PRF set organized for sterilization and storage.
How the PRF Box Works in Your Workflow
PRF was developed by Dr. Joseph Choukroun in France in 2001, and the PRF box sits at the center of that protocol:
- Draw and spin: Collect blood in PRF tubes, spin them in your centrifuge, then rest the tubes in the 12-slot rack.
- Separate the clot: Remove each fibrin clot with the Semken forcep and trim off the red cell end with the curved scissors.
- Compress: Place clots on the perforated plate of the PRF box and close the weighted lid. In about 5 minutes, the clots become membranes of constant thickness.
- Save the exudate: The liquid pressed out collects in the lower compartment. It is rich in proteins such as fibronectin and vitronectin and can be used to hydrate grafts and keep membranes moist.
- Prepare sticky bone: Dice one or two membranes on the mini tray, mix them with bone graft in the mini bowl, and allow 10 to 15 minutes for the mix to bind into a moldable block.
- Place: Use the graft packers to condense the graft, then position membranes over the site with the Giraffe forcep.
Kept in the closed box and moistened with exudate, membranes stay usable for roughly 2.5 to 3 hours.
Clinical Uses for This PRF Set
- Covering bone grafts around dental implants
- Socket and ridge preservation after extractions
- Sticky bone for horizontal and vertical ridge defects
- Sinus lift procedures, including covering membrane perforations
- Periodontal bony defect repair and soft tissue grafting
- Filling extraction sockets to help prevent dry socket
Built From 304 Stainless Steel That Resists Rust
Rust after the first autoclave cycle is a common complaint with low-cost PRF equipment. This set uses AISI-304 (18/8) medical-grade stainless steel, meaning 18% chromium and 8% nickel, which resists corrosion through repeated sterilization. Polished finishes clean easily and non-slip handles give steady control.
Care Tips for Your PRF Instruments
- Rinse off blood and graft debris right after the procedure.
- Clean the perforated plate of the PRF box with a soft brush.
- Dry all pieces fully, then autoclave them inside the cassette tray.
Specifications
- Brand: MediTek
- MPN: Dental PRF Box GRF
- Type: Dental PRF & GRF Surgical Kit
- Material: Medical-grade stainless steel (AISI-304, 18/8)
- Certification: CE Approved
- Dimensions: 18 × 8 × 4 cm
- Weight: 600 g
- Disciplines: Dental Implantology, Periodontal Surgery, Endodontics, General Dentistry
- Condition: New, in original packaging
Why Buy Your PRF Box Set From MediTek
MediTek is a manufacturer and supplier of dental instruments, so you buy direct without a reseller markup. Every PRF set is CE approved and guaranteed against defects in material and workmanship. To complete your setup, browse our PRF & GRF dental instruments, including bowls, packers and extra boxes.
Frequently Asked Questions
Does this PRF kit include a centrifuge or PRF tubes?
No. The set covers the instruments used after centrifugation. You will need a dental PRF centrifuge and PRF tubes for dentists, which the 12-slot rack is sized to hold.
How long does it take to make a PRF membrane in the box?
Membranes form in about 5 minutes under the weight of the closed lid.
Can this PRF box set be autoclaved?
Yes. All instruments are 304 stainless steel and can be autoclaved repeatedly inside the included cassette tray.
What is the PRF exudate used for?
The exudate collected in the lower tray can hydrate bone graft material, keep membranes moist and irrigate the surgical site.
Can I make sticky bone with this set?
Yes. Dice PRF membranes on the mini tray, mix them with graft particles in the mini bowl, then shape and pack the result with the graft packers.
Is this PRF set suitable for dental implant surgery?
Yes. It is designed for PRF use in implant placement, sinus lifts, ridge preservation and periodontal surgery. For more options, see our PRF GRF dental instruments collection.
Summary
Most competing PRF sets only list their parts, while this PRF box set explains what each instrument does and how it fits the full membrane and sticky bone workflow. It is made from rust-resistant AISI-304 stainless steel, a common weak point in low-cost PRF products, and ships with a cassette for clean sterilization and storage. For dental clinics that want one CE approved PRF set for implant, sinus and ridge preservation work, it is a practical, complete choice.
| Weight | 3 lbs |
|---|---|
| Dimensions | 10 × 8 × 3 in |
Related products
-
3%0Platelet Rich Fibrin Implant Surgery Kit
Original price was: $91.25.$89.19Current price is: $89.19.
47 in stock
Title Qty After Discount Price Buy 2 Get 5% Discount 2 $86.69 Buy 3 Get 8% Discount 3 $83.95 Buy 4 Get 10% Discount 4 + $82.13 -
3%0PRF GRF Dental Implant Surgery Membrane Kit
Original price was: $98.27.$96.06Current price is: $96.06.
42 in stock
Title Qty After Discount Price Buy 2 Get 5% Discount 2 $93.36 Buy 3 Get 8% Discount 3 $90.41 Buy 4 Get 10% Discount 4 + $88.44 -
3%0Dental PRF Surgery Instrument Set 6-Piece Platelet Rich Fibrin Kit
Original price was: $62.88.$61.47Current price is: $61.47.
50 in stock (can be backordered)
Title Qty After Discount Price Buy 2 Get 5% Discount 2 $59.74 Buy 3 Get 8% Discount 3 $57.85 Buy 4 Get 10% Discount 4 + $56.59
Home 
Shop 
About 
Contact